883
11/8/2015 12:00:00 AM

AWS

AMERICAN WELDING SOCIETY

As a leader in welding education and technology development, AWS promotes best practices and works to advance the science and application of welding and allied processes such as joining, brazing, soldering, cutting, and thermal spray.

Standards

Search:

Bridge Welding Code

this code covers the welding requirements for aashto welded highway bridges made from carbon and low-alloy constructional steels. this 2015 edition contains dimensions in metric si units and u.s. customary units. clauses 1 through 7 constitute a body of rules for the regulation of welding in steel construction. the provisions for clause 9 have been distributed throughout the d1.5 code. clauses 8, 10, and 11 do not contain provisions, as their analogue d1.1 sections are not applicable to the d1.5 code. clause 12 contains the requirements for fabricating fracture critical members.

80000 ریال

Metric Practice Guide for the Welding Industry

10000 ریال

Standard Symbols for Welding, Brazing, and Nondestructive Examination

10000 ریال

Standard Symbols for Welding, Brazing,and Nondestructive Examination

This standard establishes a method for specifying certain welding brazing and nondestructive examination information by means of symbols. detailed information and examples are provided for the construction and interpretation of these symbols.this system p

20000 ریال

Standard Symbols for Welding, Brazing, and Nondestructive Examination

this standard presents a system for indicating welding, brazing, and nondestructive examination requirements. the system includes provisions for the graphical representation of welds, brazes, and nondestructive examination methods with conventions for specifying, at a minimum, the location and extent of their application. optional elements and supplementary symbols provide a means for specifying additional requirements. the figures included with the text are intended to show how the correct format and applications of symbols may be used to convey welding, brazing, and nondestructive examination information. they are not intended to represent recommended welding, brazing, nondestructive examination, or design practice. the clause addressing brazing uses the same symbols that are used for welding. the clause on nondestructive examination symbols establishes the symbols to be used on drawings to specify nondestructive examination for determining the suitability of components. the nondestructive examination symbols included in this standard represent nondestructive examination methods as discussed in the latest edition of aws b1.10m/b1.10, guide for the nondestructive examination of welds. definitions and the details for the use of the various nondestructive examination methods are found in aws b1.10m/b1.10. the limitations included in specifications and codes are also beyond the scope of this standard.

40000 ریال

Standard Symbols for Welding, Brazing, and Nondestructive Examination

there is no abstract currently available for this document

40000 ریال

Standard Symbols for Welding, Brazing and Nondestructive Examination Spanish

10000 ریال

Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying

10000 ریال

Standard Welding Terms and Definitions

This standard is a glossary of the technical terms used in the welding industry. Its purpose is to establish standard terms to aid in the communication of welding information. Since it is intended be a comprehensive compilation of welding terminology, non

10000 ریال

Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying

This standard is a glossary of the technical terms used in the welding industry. Its purpose is to establish standard terms to aid in the communication of welding information. Since it is intended to be a comprehensive compilation of welding terminology, nonstandard terms used in the welding industry are also included. All terms are either standard or nonstandard. They are arranged in word-by-word alphabetical sequence.

20000 ریال

Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal

This standard prescribes procedures for the calibration and maintenance of calibration of instruments for measuring, by magnetic attraction or permeability,the delta ferrite content of an austenitic or duplex ferritic-austenitic stainless steel weld metal

10000 ریال

Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding

A standard 25 x 12 x 80 mm test specimen and method of preparation are set forth, along with two standard methods of diffusible hydrogen analysis, mercury displacement and gas chromatography. The methods are suitable for shielded metal arc welding, gas me

10000 ریال

Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings

10000 ریال

Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld

this standard specifies the preparation and assessment of fillet weld test pieces for conformity assessment of positional usability and root penetration requirements for consumables classification standards for welding non-alloy and fine grain steels, low alloy steels, stainless steels, and nickel base alloys. this standard does not specify acceptance requirements. safety and health issues and concerns are beyond the scope of this standard and are, therefore, not fully addressed herein. safety and health information is available from other sources, including, but not limited to, ansi z49.1, safety in welding, cutting, and allied processes, and applicable federal and state regulations.

40000 ریال

Filler Metal Procurement Guidelines R(1999)

This document, together with an AWS filler metal specification, is intended to describe a uniform method for providing those specific details needed for filler metal procurement which consist of the following: (1) The filler metal classification (selected

10000 ریال

Welding Consumables— Procurement of Filler Metals and Fluxes

this standard identifies various information necessary for communication between a purchaser and a supplier of welding consumables. this standard, together with an aws, iso, or other recognized welding consumable standard, provides a method for preparing those specific details needed for welding consumable procurement which consist of the following: a) the welding consumable classification (selected from the pertinent aws, iso, or other applicable welding consumable standard); b) the lot class (selected from clause 4 of this standard); c) the testing schedule (selected from clause 5 of this standard). selection of the specific welding consumable classification, lot class and testing schedule will depend upon the requirements of the application for which the welding consumable is being procured.

40000 ریال

Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding

This specification prescribes requirements for the classification of covered carbon steel electrodes for shielded metal arc welding.

10000 ریال

Specification for Carbon SteelElectrodesfor

This specification establishes the requirements for classification of carbon steel electrodes for shielded metal arc welding. The requirements include mechanical properties of weld metal weld soundness and usability of electrode. requirement for composit

10000 ریال

Specification for Carbon Steel Electrodes for Shielded Metal ArcWelding

this specification prescribes requirements for the classification of carbon steel electrodes for shielded metal arc welding. safety and health issues and concerns are beyond the scope of this standard and, therefore, are not fully addressed herein. some safety and health information can be found in informative annex clauses a5 and a10. safety and health information is available from other sources, including, but not limited to, ansi z49.1, safety in welding, cutting, and allied processes,1 and applicable federal and state regulations. this specification makes use of both u.s. customary units and the international system of units (si). the measurements are not exact equivalents; therefore, each system must be used independently of the other without combining in any way when referring to material properties. the specification with the designation a5.1 uses u.s. customary units. the specification a5.1m uses si units. the latter are shown within brackets ([ ]) or in appropriate columns in tables and figures. standard dimensions based on either system may be used for sizing of filler metal or packaging or both under a5.1 or a5.1m specifications. 1 ansi z49.1 is published by the american welding society, 8669 doral blvd., doral, fl 33166

40000 ریال

Welding Consumables - Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys - Classification

this standard specifies requirements for classification of solid wires and rods for fusion welding of aluminum and aluminum alloys. the classification of the solid wires and rods is based on their chemical composition. safety and health issues and concerns are beyond the scope of this standard and are therefore not fully addressed herein. some safety and health information can be found in informative annex clauses a6 and a12. safety and health information is available from other sources, including, but not limited to, ansi z49.1, safety in welding, cutting, and allied processes, and applicable federal and state regulations. this specification makes use of both u.s. customary units and the international system of units (si). the measurements are not exact equivalents; therefore, each system must be used independently of the other without combining in any way when referring to weld metal properties. the specification a5.10 uses u.s. customary units. the specification with the designation a5.10m uses si units. the latter are shown within brackets ([ ]) or in appropriate columns in tables and figures. standard dimensions based on either system may be used for the sizing of electrodes or packaging or both under specification a5.10 or a5.10m.

40000 ریال
نمایش از 1 تا 20 در 883 استاندارد(44 صفحه)